SCADA Data Gateway and Communication Protocol Test Harness

This page provides a demonstration of the SCADA Data Gateway and the Communication Protocol Test Harness.

The SCADA Data Gateway is configured as both an OPC Driver and a Data Concentrator.

The Communication Protocol Test Harness is configured to simulate multiple Outstations devices, which report data to the SCADA Data Gateway. These data are mapped within the SCADA Data Gateway to be reported via OPC and by a DNP3 Outstation component.

The Test Harness is also configured as a DNP3 Master to read data from the SCADA Data Gateway's outstation component.

Click on each topic in the table below to open a window that shows the training video for that topic. While the window is open, you may select the next (or previous) video in the list by hovering over it and clicking the right (or left) arrow. For best viewing, please ensure that your browser window is at least 960x720 in order to allow the videos to open full size and eliminate distortion.

1. Introduction and Overview   3:58
2. Communication Protocol Test Harness   3:08
3. SCADA Data Gateway   1:17
4. Conclusion   0:19



Quick Links  Contact Us:
About Us

Triangle MicroWorks, Inc.
Sales: +1 919.870.5101
Support: +1 919.781.1931
Fax: +1 919.870.6692

Follow us on YouTube Follow us on Facebook Visit us on LinkedIn Follow us on Twitter

Copyright © 2013-2019 Triangle MicroWorks, Inc. All Rights Reserved